Friday, June 14, 2013

Integrated Controller v0.2.3 PCB Errata - SCR Artwork is backwards:

Yesterday I discovered an error in release v0.2.3 of the PCB:  U1 (SCR):  Silk screen is backwards, install this part opposite of how the silk screen indicated.  (Flat side of SCR should FACE the copyright notice wording, not the middle of the PCB).

If you are assembling PCBs v0.2.3, just solder in the SCR opposite of what the silk screen shows.  The controller will work if the SCR is soldering as shown, but doing so will prevent the crowbar from functioning if it needs to!

No comments:

Post a Comment