Posted KiCAD design files

Given the current status of the project, I posted the KiCAD files today.   The version posted is 0.2.4, and it differs from the v0.2.3 PCB fabs in:

• Added R60 / R61, to be used in conjunction with a TLE5206-2 bridge.  (See source code)
• Modified some of the part numbers, ala using Male headers instead of Female for SERVICE (Lower cost).  That will require you to purchase only one $$$ female header and solder it to the USB <--> TTL converter.
• Added part numbers for switches I used in combination with the custom front panel

See CAD-Files tab above.

It should be noted that as of yet, none of the v0.2.3 PCBs have actually been assembled.  If (when) problems are found over the coming weeks / months I will update the CAD files, but will likely not be doing careful revision control...

If you want to use these for your own project, the are released under the same licencing terms as the source: 

    Creative Commons Attribution-NonCommercial-ShareAlike 3.0 license 

CC BY-NC-SA,   http://creativecommons.org/licenses/by-nc-sa/3.0/

And idea beyond that, contact me.

And if you do find issues or enhancements  please drop me a line.  I likely will maintain the CAD files for a while and would be grateful to be able to roll in any improvements / corrections.